| After-sales Service: | Aftermarket Spare Part, Assemble Support |
|---|---|
| Warranty: | 1 Year |
| Certification: | TUV, ISO, RoHS, CE |
| Condition: | New |
| Rated Load: | 6-9t |
| Transmission: | Hydraulic |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 7ton LW700KN\LW700K Logging Forks & Millyard Forks & Pallet Forks for Wheel Loader
LW700K
Rated Power:
216kW 290HP @2,100rpm
Operating Weight: 23,500kg 51,808lb
Dimensions(L×W×H):
9,190mmX3,070mmX3,600mm
30'2''X10'1''X11'8''
LW700KN
Rated Power:
226kW 303HP @2,100rpm
Operating Weight: 23,500kg 51,808lb
Dimensions(L×W×H):
9,190mmX3,070mmX3,600mm
30'2''X10'1''X11'8''
new design of forestry clamp loader is equipped with wood clamp specially designed for log handling. A transverse force bearing mechanism is specially designed to address the complex movements such as flushing and pulling of materials by the upper clamp and the damage to the upper clamp due to the turning or walking of the machine on bumpy roads, and this design has applied and obtained a patent.
The hinge point of the clamp is optimized and the optimized Z-shaped reversal six-bar mechanism increases the breakout force by more than 35% at high-level unloading positions, which can better meet the reversal the gripping force of the clamp, and the arm of force of the oil cylinder of the upper clamp is extended to increase the clamping force by more than 30%;
The upper clamp is widened and a reinforcement plate is added to the side to increase structural strength while a wear-resisting plate is added to the bottom of lower clamp to extend the service life of the clamp;
The zigzag structure can increase the clamping force to prevent slipping and shifting of timber;
The enlarged diameter of upper steel pipe can improve the clamp strength; the extended tooth top of the lower clamp can increase the lifting efficiency;
The protective plate is widened and the protection for cylinder joint and pipeline is strengthened; the machines and tools are all made of high-strength materials and the key force-bearing parts are structurally reinforced;
Double anti-wear design is adopted and the worst working conditions are considered through CAE analysis to prevent open welding and cracking. A protective net is added to the cab that can ensure easy startup and clean, increase the exchange for external fresh air, increase internal press, and prevent external dust;
A protective bracket is added at the bottom and thickened steel plates are used in the engine, gearbox, and front frame to prevent branches and leaves from entering into the engine compartment and chassis, enhancing the protection for critical components.
2. Product description
Our wheel loader's Key elements choose international brands parts, such as original Cummins engine, ZF drive axles, Rexroth hydraulic valve and Rexroth brake element etc., to make sure perfect performance for our loaders, under strict quality management, the reliability of machine is therefore assured.
To ensure low maintenance cost and high reliability, we choose Wet multi-disc brake and full hydraulic brake system. The wet disc brake is completely enclosed, which efficiently prevents dirt from ingress and reduces wear and maintenance. It needs not to adjust the brake due to wear, hence the maintenance is further reduced. It is also unnecessary to adjust the new parking brake. The wet multi-disc brake has higher reliability and longer service life.
The brake system uses two independent hydraulic circuits and further improves reliability. If one of the circuits has failure, there will be a standby hydraulic system available. The full hydraulic brake means no air ingresses and no water condensation occurs in the system. Therefore no pollution, rust and freezing will be caused.
3. Advantages for our wheel loader:
(1) Power drive flexible suspension damping;
(2) Dual-pump combined technology, flow expanding steering, guide control;
(3) The frame of the high strength adapts to the heavy load condition;
(4) Working mechanism lightens the unloading impact greatly;
(5) Hydraulic wet brake ensures the safe and reliable operation and travelling;
(6) The adjustable instrument panel contributes to the best operation position;
(7) Intelligent electronic monitoring system could monitor the operation condition of the machine accurately.
(8) Convenient maintenance
With integrated oil filling, the service person could access to the maintenance point from the ground, featuring higher efficiency.
The side plates of the shield and rear shield are opened easily, and it is convenient to check the engine and parts, and daily maintenance.
1. Features advantage:
Good flexibility and maneuverability, low fuel consumption, high construction efficiency, large digging force, comfortable driving environment and wide range of application.
2. Characteristic:
(1) Power drive flexible suspension damping;
(2) Dual-pump combined technology, flow expanding steering, guide control;
(3) The frame of the high strength adapts to the heavy load condition;
(4) Working mechanism lightens the unloading impact greatly;
(5) Hydraulic wet brake ensures the safe and reliable operation and travelling;
(6) The adjustable instrument panel contributes to the best operation position;
(7) Intelligent electronic monitoring system could monitor the operation condition of the machine accurately.
(8) Convenient maintenance
With integrated oil filling, the service person could access to the maintenance point from the ground, featuring higher efficiency.
The side plates of the shield and rear shield are opened easily, and it is convenient to check the engine and parts, and daily maintenance.
3. Working on various Earth construction projects
1. Quality assurance
2. Multi-currency payment ( RMB / USD / EUR) & Multi Payment team: T/T, L/C at sight....
3. Cheap shipment costs, Rich container package & Fast shipment:
Raygoo group cooperated with many shipping company many years, which can get the cheapest ocean freight with latest shipping date, even whole shipping tracking.
4. Long-term spare parts support:
Since 2015, in order to effectively solve our customers spare parts demand, we built a spare parts department, which get high speaking feedback from our clients.
5. Long-term technical service support:
We have a professional technical team which provide technical support for our domestic or oversea clients. If clients have some technical problems which can't deal with it by self, we can provide video support or door to door support.
6. Door and door service:
Till now, we can support door and door assembling service if they can't assemble it when container arrived in some countries,such as Philippines, Zimbabwe, Mozambique, Kenya, Cambodia, Indonesia.... If the quantity is large, even can provide engineer indoor support.
7. Rich brands:
As we worked on construction machines more than 15 years, which already build nice strategic relationship with world brand company for competitive price and quality.support
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}